ASIO4ALL Download for Windows 10 and 11
The ASIO4ALL publisher lists version 2.22 for Windows 10 and 11. Its multilingual installer is available through the official download page, which also lists the release date and minimum Windows version. Get the installer there, then select ASIO4ALL inside the audio application you intend to use.

In this guide
Where to get the ASIO4ALL download
The safe ASIO4ALL download is the installer published on asio4all.org, the official site of the driver's author, Michael Tippach. The current release is ASIO4ALL 2.22, dated July 23, 2026, and the file is named ASIO4ALL_2_22.exe. It officially supports Windows 10 and Windows 11, and it is free for end users.
Open the publisher's download page and check the first release entry. That entry tells you the version number, the release date and the minimum Windows version before you fetch anything. If a newer release has appeared since this guide was written, use the version shown on the publisher page rather than the number quoted here.
This site is a dedicated ASIO4ALL resource guide and does not host the file. We point you to the publisher because that is the only place where the installer, its release notes and its version history are kept together in one consistent record.
What the download actually is
ASIO4ALL is a universal ASIO driver for Windows. It does not replace your sound card driver. Instead, it sits on top of the existing WDM driver that Windows already uses and presents that device to your DAW through the ASIO interface, which most music software prefers for low latency work.
- Platform: Windows only. macOS uses Core Audio and Linux uses ALSA, JACK or PipeWire, so there is no Mac or Linux build.
- Name in your software: after installation it appears as ASIO4ALL v2 in the driver list of your DAW.
- Licence: free for end users, including commercial audio work. Resale and bundling are restricted by the publisher.
- Language: the 2.22 release page offers a multilingual installer.
What is new in ASIO4ALL 2.22
The 2.22 release notes list three headline changes. The most visible is native ARM64 and ARM64EC support, which matters if you record on a Windows on Arm laptop. The release also improves dropout prevention in certain cases and ships default settings that work with Qualcomm Aqstic microphone array input.
The two releases before it were smaller but still useful. Version 2.21 improved USB Audio Class 1 behaviour at 44.1 kHz, and version 2.20 added an option to pause host audio from the system tray.
| Version | Release date | Main change |
|---|---|---|
| 2.22 | July 23, 2026 | Native ARM64 and ARM64EC support, improved dropout prevention in certain cases, defaults that work with Qualcomm Aqstic mic array input |
| 2.21 | June 10, 2026 | USB Audio Class 1 improvements at 44.1 kHz |
| 2.20 | April 27, 2026 | Option to pause host audio from the system tray |
If you want the full timeline, including what changed in earlier builds, our ASIO4ALL version history collects the release notes in one place. Arm laptop owners should also read the Windows on Arm guide before installing.
Check your setup before the ASIO4ALL download
A few minutes of checking saves a lot of guesswork later. ASIO4ALL can only expose audio devices that Windows already handles correctly, so the starting point is always the hardware and its WDM driver, not the ASIO layer.
What you need
- A supported Windows installation: Windows 10 or Windows 11.
- An audio device with a compatible Windows WDM driver, such as onboard audio, a USB headset, a USB microphone or a class-compliant interface.
- An audio program that supports ASIO, for example FL Studio, Ableton Live, Cubase or REAPER.
- Administrator rights on the PC, since you are installing a driver.
Test the device in Windows first
Play a sound through your headphones, speakers or interface from the Windows sound settings, and watch the input level if you plan to record. If Windows itself cannot see the device, start with the cable, the USB port and the manufacturer's hardware driver. The ASIO4ALL download will not fix a device that Windows cannot use.
Note: If your interface vendor already supplies a supported ASIO driver, check its setup instructions first. A dedicated driver is usually the better choice for that hardware. ASIO4ALL is most useful for an onboard sound card or an interface without a suitable manufacturer ASIO driver.
Confirm you have the right file
On the 2.22 installer listing, the multilingual download points to ASIO4ALL_2_22.exe. The release page gives you a clear way to check which file and version you are getting before you open it. Compare the name in your Downloads folder with the name on that page.
Avoid unofficial copies
Searching for an ASIO4ALL download often turns up file-hosting sites, bundled "driver packs" and repackaged installers. These add nothing and remove the one thing you need: certainty that the driver came from the publisher. Since the software is free and the publisher restricts bundling, there is no legitimate reason to fetch it anywhere else.
Watch out: A driver runs with deep access to your audio system. Do not install a copy whose name, version or source you cannot match against asio4all.org. If the file name differs from the one on the release page, delete it and download again from the publisher.
A note on source code
ASIO4ALL is distributed as a ready-made installer. There is no official GitHub source repository, so repositories using the name are not the publisher's distribution channel. The installer from asio4all.org is the one to use.
Run the installer and select ASIO4ALL in your DAW
Save your session and close the audio application before running the installer. Review the setup prompts as they appear, then reopen the application so it can find the newly installed driver. The exact menu names vary by host, but the order of operations is the same everywhere.
Begin with one familiar output so that routing problems are easy to isolate. Add a recording input after playback works, then test the combination in a small project. Check the input meter before you record so you can confirm the host is listening to the intended channel.
- Open your audio application's device preferences and select ASIO as its driver type if you see a separate driver type control.
- Select ASIO4ALL v2 and open the ASIO control panel from the same preferences.
- Enable the output you want to hear, assign it in your host if needed, and play a known audio clip at a comfortable level.
- Once playback is clean, enable the input you want to record from and arm a track to watch its meter.
- Note the buffer size and sample rate that worked, so you can return to them later.
Where to find audio settings in common DAWs
| DAW | Menu path |
|---|---|
| FL Studio | Options › Audio settings |
| Ableton Live | Options › Settings › Audio (older versions: Preferences) |
| Cubase | Studio › Studio Setup › Audio System |
| REAPER | Options › Preferences › Audio › Device |
Ableton also publishes its own advice on ASIO drivers for Windows, which is worth reading if Live is your main host. For a full step-by-step walkthrough with verification checks, see our guide to installing ASIO4ALL on Windows 10 and 11.
First settings to check after installing
The defaults are a sensible starting point, and the publisher's getting started manual describes the control panel in detail. Still, two values deserve a look on day one: the buffer size and the sample rate.
Buffer size
The buffer is the block of audio the computer processes at once. To convert it to time, divide the samples by the sample rate and multiply by 1,000. At 48 kHz, 128 samples is about 2.7 ms, 256 is about 5.3 ms and 512 is about 10.7 ms. At 44.1 kHz, 256 samples is about 5.8 ms.
Smaller buffers feel more immediate when playing a virtual instrument or monitoring a microphone, but they leave the computer less time to finish each block. If you hear clicks, raise the buffer one step and try again.
Tip: Start at 256 samples for general work. Drop to 128 for tracking if playback stays clean, and move to 512 or higher when mixing a dense project with many plugins.
Sample rate
Match the project sample rate to what your device handles comfortably, usually 44.1 kHz or 48 kHz. Keep Windows and the DAW at the same rate where you can, since mismatches are a common cause of silence or distorted playback.
When you might want an older build
Most people should use the current release. An older build is only worth considering if a specific setup worked on it and broke after an update, and even then it is a temporary measure while you report the problem.
For an older build, follow the publisher's archive and read that build's release notes first. Do not hunt for old versions on third-party sites, for the same reasons given above. Keep a note of which version you installed, so you can move back to the current release once the issue is resolved.
Free for your music, with limits on redistribution
Downloading and using ASIO4ALL costs nothing, whether you are recording a hobby demo, a podcast or paid client work. What the publisher restricts is resale and bundling of the driver with other products. Our page on whether ASIO4ALL is free covers the licence in plain language.
Frequently asked questions
Yes. ASIO4ALL is free for end users, including commercial audio work. The publisher restricts resale and bundling, which is one more reason to download it only from asio4all.org.
Download the version listed first on the publisher's download page. At the time of writing that is ASIO4ALL 2.22, released July 23, 2026, with the installer file ASIO4ALL_2_22.exe.
The current release officially supports Windows 10 and Windows 11, and the publisher lists Windows 10 as the minimum for the current installer. Check the release notes of any older build before trying it on another Windows version.
No. ASIO4ALL is a Windows driver. On macOS, audio applications use Core Audio, which already provides low latency access to audio devices without an extra driver of this kind.


